A leaking kitchen faucet isn’t something that can’t be fixed neither should such small chore cost you a lot of money. With our simple step by step guide, you can easily learn how to fix a leaking kitchen faucet and save not only the money but also the resources.

leaking kitchen fucet

Many people don’t bother much with issues like a leaking faucet or a dripping ceiling and then regret it later. As water shortage is becoming an increasingly alarming situation your negligence will not only burden your pocket but is also a waste of resources.

With simple techniques and guidelines, you can easily learn how to fix wheather it is touchless kitchen faucet or not. So quit being a procrastinator and solve this issue ASAP.

Why Learning How to Fix a Leaking Kitchen Faucet is Necessary?

If the leaks in kitchen pipes or any other pipes get out of control, it might cause drainage problems which will require you to change your plumbing.

It can also cause water stains in your sink which often can’t be removed. In some cases if your faucet is too old then you maybe have to replace a faucet.

Also add the constant running of water which will result in will cost you a lot of your hard-earned money on water bills. Another huge reason as o why you should take this problem very seriously is how due to waste of resources on a massive scale.

Soon we won’t be able to get water to fulfill our basic needs. Thus, your small negligence or carelessness could have such drastic consequences, but all this can be easily avoided by keeping all the plumbing and electricity issues in check.

Step 1: Determine the Site of Leak

The first and a very crucial step of fixing the leak is to determine where exactly the leak if coming from. Only then you can decide whether you are able to fix it or not and which tools would be required to fix it.

Step 2: Be Well Equipped

Before starting your operation, make sure you are all geared up for this task. You’ll require some basic plumbing tools, sealants, and plumber’s putty etc.

You can also check website of your faucet’s manufacturers and see the list of gadgets needed to make repairs but for this purpose you’ll need to know the manufacturer as well as the type of faucet you have.

Step 3: Determine Your Faucet Type

There are different styles and types of faucets and each one has a different method of getting fixed. Therefore, determine which faucet type is installed in your kitchen before attempting to fix it.

These are some common types of faucets commonly installed:

  • Compression Faucet
  • Ball Faucet
  • Cartridge Faucet
  • Ceramic Disk

Fixing a Compression Faucet:

These have separate hot and cold-water handles and are easily identifiable. These are usually present in old build homes and are more prone to leaks and other malfunctioning albeit being quite inexpensive.

Here is how you can fix a leak in compression faucet:

  • Remove the handles with a screwdriver.
  • Remove the nut with a wrench and look for the O-ring. The O-ring is thinner than the washer and the washer is usually made of rubber.
  • Change the O-ring if the faucet is leaking around the handles and change the faucet if the faucet body is leaking.
  • Reassemble the handle after fixing it.
  • If the leak is beyond repair, you can simply replace it as its quite reasonable to get a new one.

Fixing a Ball Faucet:

These were the first type of washer less faucet and are quite common these days. They have a handle that rotates over a rounded ball shaped cap right above the face of the faucet spout. Here is how you can fix a leak in the ball faucet of your kitchen:

  • Disassemble the faucet with the help of an Allen wrench.
  • If the faucet is leaking from the base of the spout, it is usually caused by a worn-out O-ring.
  • Remove the cam, the washer, and the ball assembly and visually inspect for any damages.
  • Replace the ball with either a plastic or a brass ball.
  • Install the new valve seals and springs by fitting a spring into each rubber seal and dropping this assembly into its port at the bottom of the faucet body.
  • Reattach the single lever and tighten it with the screwdriver.

Fixing a Cartridge Faucet:

Contain a cartridge under the handle and can be single or double handled; the double one resembles the compression faucet. The main difference is that cartridge faucet is smooth and consistent unlike compression faucet and doesn’t require you to tighten down (compress) the washer like compression faucet.

Follow these steps to learn how to fix a leaking kitchen faucet which is cartridge style faucet:

  • Remove the faucet handle.
  • Loosen the cartridge retaining nut.
  • Remove the cartridge and look for the O-rings.
  • Remove the O-rings by cutting them with a thin knife and replace them.
  • Replace the old cartridge with a new one.
  • Reassemble the handle.

Fixing a Ceramic Disk Faucet:

These are reliable, high quality faucets and are the latest development in faucet technology.

They have a single handle over a cylindrical body and the cold and hot water is mixed in a mixing chamber called pressure balance cartridge.Fix this type of faucet by following the below steps:

  • Remove the faucet handle.
  • Take out the metallic escutcheon cap which sits directly under the handle.
  • Remove ceramic disk cartridge.
  • Remove the cartridge rubber seal seats, seals, and O-rings.
  • Reassemble the handle.